Product Groups

Thrust cylindrical roller bearings

(70)

A5200 Metric Cylindrical Roller Radial Bearing

(13)

Single row Cylindrical roller bearing

(90)

Two-Row Cylindrical Roller Radial Bearings

(55)
See More
MIP Bearing Incorporated Company
  • Address35 Lengkong Gudang, Serpong, Kota Tangerang Selatan 16321 Indonesia
  • Factory Address35 Lengkong Gudang, Serpong, Kota Tangerang Selatan 16321 Indonesia
  • Worktime9.00-18.00
  • Phone(Working Time)+62-21-6537261
  • Phone(Nonworking Time)+62-21-6537237
Contact Now

Single row Cylindrical roller bearing

Contact Now

SKF single row cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are in:
the cage design and material
the configuration of the inner and outer ring flanges 
Bearing features
Low friction (Roller end / flange contact area) 
The open flange design , together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Long service life 
The logarithmic roller profile reduces edge stresses at the roller/raceway contact  and sensitivity to misalignment and shaft deflection.
Enhanced operational reliability 
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.
Separable and interchangeable 
The separable components of SKF cylindrical roller bearings are interchangeable . This facilitates mounting and dismounting, as well as maintenance inspections.
High speed capability 
The cage designs are suitable for high speeds, rapid accelerations and peak loads.

See More
Bearing Number Bore Dia Outer DIa Width Size
80 mm x 170 mm x 39 mm Da max NTN N316G1C3 Single row Cylindrical roller bearing NTN N316G1C3 1 pcs Negotiable
60 mm x 130 mm x 31 mm Profile NTN NJ312EG1C3 Single row Cylindrical roller bearing NTN NJ312EG1C3 1 pcs Negotiable
25 mm x 52 mm x 18 mm F SNR NJ.2205.E.G15 Single row Cylindrical roller bearing SNR NJ.2205.E.G15 1 pcs Negotiable
30 mm x 62 mm x 16 mm Nlim (oil) NTN NJ206ET2XC3 Single row Cylindrical roller bearing NTN NJ206ET2XC3 1 pcs Negotiable
30 mm x 62 mm x 16 mm Characteristic inner ring frequency, BPFI NTN NUP206ET2XC3 Single row Cylindrical roller bearing NTN NUP206ET2XC3 1 pcs Negotiable
45 mm x 85 mm x 19 mm B NTN NU209ET2X Single row Cylindrical roller bearing NTN NU209ET2X 1 pcs Negotiable
95 mm x 170 mm x 43 mm da min NTN NU2219G1C3 Single row Cylindrical roller bearing NTN NU2219G1C3 1 pcs Negotiable
50 mm x 110 mm x 40 mm Characteristic inner ring frequency, BPFI NTN NJ2310EG1C3 Single row Cylindrical roller bearing NTN NJ2310EG1C3 1 pcs Negotiable
65 mm x 140 mm x 48 mm Nlim (grease) NTN NU2313G1 Single row Cylindrical roller bearing NTN NU2313G1 1 pcs Negotiable
65 mm x 140 mm x 48 mm Relubricatable NTN NU2313EG1 Single row Cylindrical roller bearing NTN NU2313EG1 1 pcs Negotiable
55 mm x 100 mm x 21 mm Mass (without HJ ring) NTN NU211G1P5 Single row Cylindrical roller bearing NTN NU211G1P5 1 pcs Negotiable
45 mm x 100 mm x 25 mm F SNR NU.309.E.G15 Single row Cylindrical roller bearing SNR NU.309.E.G15 1 pcs Negotiable
4/8