MIP Bearing Incorporated Company
  • Address35 Lengkong Gudang, Serpong, Kota Tangerang Selatan 16321 Indonesia
  • Factory Address35 Lengkong Gudang, Serpong, Kota Tangerang Selatan 16321 Indonesia
  • Worktime9.00-18.00
  • Phone(Working Time)+62-21-6537261
  • Phone(Nonworking Time)+62-21-6537237

Single row Cylindrical roller bearing

Contact Now

SKF single row cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are in:
the cage design and material
the configuration of the inner and outer ring flanges 
Bearing features
Low friction (Roller end / flange contact area) 
The open flange design , together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Long service life 
The logarithmic roller profile reduces edge stresses at the roller/raceway contact  and sensitivity to misalignment and shaft deflection.
Enhanced operational reliability 
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.
Separable and interchangeable 
The separable components of SKF cylindrical roller bearings are interchangeable . This facilitates mounting and dismounting, as well as maintenance inspections.
High speed capability 
The cage designs are suitable for high speeds, rapid accelerations and peak loads.

60 mm x 130 mm x 46 mm da max NTN NJ2312ET2C4 Single row Cylindrical roller bearing

NTN NJ2312ET2C4
1 pcs Negotiable

70 mm x 125 mm x 24 mm Cage Material NTN NU214C3 Single row Cylindrical roller bearing

NTN NU214C3
1 pcs Negotiable

Static (Coa) ZKL NU315 Single row Cylindrical roller bearing

ZKL NU315
1 pcs Negotiable

95 mm x 170 mm x 32 mm d1 NTN NUP219U Single row Cylindrical roller bearing

NTN NUP219U
1 pcs Negotiable

80 mm x 140 mm x 26 mm outside diameter: NTN NJ216ET2 Single row Cylindrical roller bearing

NTN NJ216ET2
1 pcs Negotiable

40 mm x 110 mm x 27 mm B NTN NJ408G1C4 Single row Cylindrical roller bearing

NTN NJ408G1C4
1 pcs Negotiable

50 mm x 90 mm x 23 mm Da max SNR NU.2210.E.G15 Single row Cylindrical roller bearing

SNR NU.2210.E.G15
1 pcs Negotiable

130 mm x 280 mm x 93 mm da max NTN NJ2326C3 Single row Cylindrical roller bearing

NTN NJ2326C3
1 pcs Negotiable
1/8